SATKING 3 IN 4 OUT MULTISWITCH

$43.00
inc GST within Australia

What is a multiswitch?  A multiswitch is used when the application requires multiple satellite decoders (more than 2) to be connected to a single dish.  A twin output LNB be used in conjunction with the multiswitch.  This switch will work with ALL satellite decoders on the market with no need to adjust any settings whatsoever (other than the LNB settings if need be).  These multiswitches also allow for the connection of an external antenna so you can feed free to air antenna signals down the same coaxial line as the satellite.  If you are connecting an antenna, you will have to separate the satellite and antenna signals at the back of the wallplate with the use of a diplexer. This multiswitch will enable connection of up to 4 single input decoders or 2 x twin tuner satellite decoders such as those used by pay TV providers in Australia.  See diagram below.

 SATKING 3 IN 6 OUT MULTISWITCH                                       

$55.00
inc GST within Australia

Same as above except allows connection of up to 6 single tuner decoders                                                                               or up to 3 twin tuner decoders. See information above.

Postage can be arranged

So give me a call on 0400 313 354
or
Email: claude@travelsat-tv.com.au